Labor only. Parts, shop supplies and GST extra. Subject to change.
Inflate the tires, lube the chain and a basic safety inspection to ensure the bike is safe to ride. Does NOT include adjustments or repairs.
Add on option with Quick or Standard tune. Full bike wash with soap and water. $40 if without a tune up.
*Mandatory for extremely dirty bikes.
Basic tune including wipe and lube chain, air up tires, adjustment of brakes and shifting/derailleurs, and headset bearing adjustment if needed.
*Great cost effective option when suitable.
Full tune-up including bike wipe down and full drivetrain cleaning (on bike), headset, hub and bottom bracket bearing adjustments, wheel truing, adjust brakes (including rotor truing and cleaning pads as needed). Includes installation labor for new brake pads, chains, cassettes, tubes and tires as well as externally routed cables and housing.
* Recommended as base level tune for commuters, any bike that sees frequent or demanding use, or a bike that hasn't been serviced in quite a while.
Exceeds Gold Standard with a full bike wash with soap and hot water (unavailable during winter, will wipe clean), drivetrain removal and deep clean, headset, bb and hub bearings inspected and greased, brakes bled, all cables and housing replaced (internal routing extra), tubeless sealant topped up, and installation labor for all new parts included.
*Does not include suspension or pivot bearing service. Press fit BB and cartridge hub bearings that need to be replaced will incur an additional fee.
Elite service recommended for enthusiast riders with high end mountain bikes or to bring an older or second hand mountain bike up to peak performance.
Exceeds Platinum Premium with a basic fork and shock service (in house or $110 labor credit towards service from Evolution Suspension), linkage disassembly and pivot bearing inspection (up to 4 pivots). Extra pivots and bearing replacement charged at hourly shop rate if necessary.
Labor only,. Parts, GST and shop supplies extra. Subject to change.
Troubleshoot electrical faults on hub drive electric bikes. Diagnose fault to motor, controller, battery, wiring and/or connectors. Please bring battery, key and charger with bike. Diagnosis only, repairs quoted separately.
Any electrical repair work such as installing new wiring or connectors, soldering, repairing or replacing motors or controllers or any other ELECTRICAL work on an E-bike. Standard shop rate applies to all other non-electric repair work.
Labor only,. Parts, GST and shop supplies extra. Subject to change.
Assembly of a bike from a box (new or after shipping), all necessary adjustments and a test ride. Price varies depending on level of assembly required.
For the premium MTB experience nothing is better than picking your own parts! Got a certain fork you want to ride, maybe a particular set of brakes, how about your wheels and drivetrain? Don't waste time swapping out OE parts, build it how you want from the start! Includes consultation and all labor to assemble a custom spec bike. Bring your own frame, or buy one from us!
*All new Banshee frame purchases receive 20% off parts used in a custom assembly.
Labor only, per wheel. Parts, GST and shop supplies extra. Subject to change.
Replace and adjust rim brake pads.
Replace disc brake pads, clean rotor and adjust caliper.
Bleed hydraulic brake system.
Labor only, per wheel. Parts, GST and shop supplies extra. Subject to change.
Replacement of tube or tire (conventional).
Hub drive E-bikes $25
Cost to install a new tubeless tire. Sealant extra.
Requires tubeless ready rim and tire in good condition. Valve stem, rim tape & sealant extra.
Lateral true of one wheel.
Tension and true (lateral and radial) of one wheel.
Replace broken spoke and true wheel.
Clean and re-pack bearings
Clean and re-pack bearings.
Remove old and press in new bearings
Remove old and press in new bearings plus freehub service
Custom hand built wheel.
By default we prefer Sapim Race double butted spokes and brass nipples for longevity and durability, however custom means custom and we can accommodate a variety of spokes and nipples into your wheels.
Prices below are for labor only. Charges may vary based on model and condition. Removal & installation fees may apply. Parts, shop supplies & GST extra.
Recommended every 50 hours of riding or annually at minimum.
Recommended every 150-200 hours of riding.
Recommended every 50 hours of riding or annually at minimum.
Recommended every 150-200 hours of riding.
All prices are for labor only,. Parts, shop supplies & GST extra. E-bikes may incur additional labor charges. Shop supplies charged at 2.5% of labor. ** Bikes left more than 14 days after completion without prior consent will be charged a $5 per day storage fee beginning on the 15th day.**